3mm Scale Model Railways

www.3smr.co.uk
01737 761919
9am - 7:30pm GMT

 
Order Form Motors& Gearboxes Accessories

BRITISH RAILWAYS

BR Standard class 7MT 70XXX Britannia Riddles 4-6-2. Malcolm Mills does a cast polyurethane resin body which is based on a Triang Britannia. He also does a BR1 (or 1A) tender body with narrow topped coal bunker. 70000 - 70024 all had fluted coupling rods when new, 70025- 70054 had plain. Problems with fluted rods led to all leading rods being changed to plain, most of the trailing rods following suit. All ER locomotives ended up plain, but the WR locomotives retained the fluted rear rods. Wheel base 6’ 3” bogie - 5’ 6” - 7’ 0” + 7’ 0” - 10’ 0”. The correct wheels for a Riddles standard 7MT are:
bogie 3’ 0” 9 mm 9 spoke
3’ 0” 9 mm 9 No pin Discontinued Chris Hardy
3’ 0” 9 mm 9 No pin 3 mm Society W48
drivers 6’ 2” 18.5 mm 20 spoke pin between, 28” stroke.
6’ 0” 18 mm 20 pin between Long pin 3 mm Society W34 3 mm Society W32 for 14.2
6’ 0” 18 mm 20 pin between Short pin 3 mm Society W35 3 mm Society W33 for 14.2
trailing 3’ 3½” 9.875 mm 10 spoke
3’ 0” 9 mm 10 No pin Discontinued Chris Hardy
3’ 0” 9 mm 10 No pin Kean-Maygib KM12 (330)
3’ 0” 9 mm 10 No pin Large hub Romford
3’ 0” 9 mm 10 No pin 3 mm Society W1
or
3’ 4” 10 mm 10 No pin 3 mm Society W79
tender 3’ 3½” 9.875 mm 10 spoke, wheel base 7’ 0” - 7’ 0”.
3’ 0” 9 mm 10 No pin Discontinued Chris Hardy
3’ 0” 9 mm 10 No pin Kean-Maygib KM12 (330)
3’ 0” 9 mm 10 No pin Large hub Romford
3’ 0” 9 mm 10 No pin 3 mm Society W1
or
3’ 4” 10 mm 10 No pin 3 mm Society W79
70000-70024 and 70030-70044 had BR1 4,250 gallon tenders with narrow topped coal bunker, 70025-70029 had BR1A 5,000 gallon with narrow topped coal bunker, 70045-70054 had BR1D 4,725 gallon with wide topped coal bunker and coal pusher.

BR Standard class 5MT 73XXX Riddles 4-6-0. BEC cast kit 3SMR C12 and C16. Planned Chris Thane etched and cast resin kit. 73000 - 73049 had fluted coupling rods and Walschaerts valve gear, 73050 - 73124 had plain coupling rods and Walschaerts valve gear, 73125 - 73154 had plain coupling rods and Caprotti valve gear. Wheel base 6’ 3” bogie - 5’ 6” - 7’ 0” + 8’ 6”. The correct wheels for a Riddles standard 5MT are:
bogie 3’ 0” 9 mm 9 spoke
3’ 0” 9 mm 9 No pin Discontinued Chris Hardy
3’ 0” 9 mm 9 No pin 3 mm Society W48
drivers 6’ 2” 18.5 mm 20 spoke pin between, 28” stroke.
6’ 0” 18 mm 20 pin between Long pin 3 mm Society W34 3 mm Society W32 for 14.2
6’ 0” 18 mm 20 pin between Short pin 3 mm Society W35 3 mm Society W33 for 14.2
tender 3’ 3½” 9.875 mm 10 spoke, wheel base 7’ 0” - 7’ 0”.
3’ 0” 9 mm 10 No pin Discontinued Chris Hardy
3’ 0” 9 mm 10 No pin Kean-Maygib KM12 (330)
3’ 0” 9 mm 10 No pin Large hub Romford
3’ 0” 9 mm 10 No pin 3 mm Society W1
or
3’ 4” 10 mm 10 No pin 3 mm Society W79
Standard class Fives were fitted with various tenders, 73000-73049 had BR1 4,250 gallon with narrow topped coal bunker, 73080-73089, 73120-73134, and 73145-73171 had BR1B 4,725 gallon with wide topped coal bunker, 73065-73079, 73090-73099 and 73135 -73144 had BR1C 4,725 gallon with wide topped coal bunker, 73110-73119 had BR1F 5625 gallon with wide topped coal bunker, 73050-73052 had BR1G 5,000 gallon with narrow topped coal bunker, 73053-73064 had BR1H 4,250 gallon with narrow topped coal bunker.

BR Standard class 4MT 75XXX Riddles 4-6-0. Planned Chris Thane planned etched and cast resin kit 100-2-1-003. 75000 - 75079. Wheel base 6’ 3” bogie - 5’ 6” - 7’ 0” + 8’ 0”. The correct wheels for a Riddles standard 4MT 4-6-0 are:
bogie 3’ 0” 9 mm 9 spoke
3’ 0” 9 mm 9 No pin Discontinued Chris Hardy
3’ 0” 9 mm 9 No pin 3 mm Society W48
drivers 5’ 8” 17 mm 18 spoke pin between, 28” stroke.
5’ 8” 17 mm 18 pin between 3.5 mm throw Sharman S442
or if tight (which it shouldn’t be), or 14.2
5’ 6” 16.5 mm NEW Romford finescale wheel WR16.5/18 (18 spoke) from 3SMR
5’ 6” 16.5 mm 18 pin between Long pin 3 mm Society W14 3 mm Society W12 for 14.2
5’ 6” 16.5 mm 18 pin between Short pin 3 mm Society W15 3 mm Society W13 for 14.2
5’ 6” 16.5 mm 18 pin between Discontinued Chris Hardy
tender 3’ 3½” 9.875 mm 10 spoke, wheel base 6’ 6” - 6’ 6” on BR2 and BR2A, 7’ 0” - 7’ 0” on BR1B.
3’ 0” 9 mm 10 No pin Discontinued Chris Hardy
3’ 0” 9 mm 10 No pin Kean-Maygib KM12 (330)
3’ 0” 9 mm 10 No pin Large hub Romford
3’ 0” 9 mm 10 No pin 3 mm Society W1
or
3’ 4” 10 mm 10 No pin 3 mm Society W79
75000-75049 had BR2 3,500 gallon tenders, 75050-75064 had BR2A 3,500 gallon tenders, 75065-75079 had BR1B 4,725 gallon tenders.

BR Standard class 4MT 76XXX Riddles 2-6-0. Chris Thane etched and cast resin kit 100-2-1-001. 76000-76114. Wheel base 8’ 9” - 7’ 7” + 7’ 9”. The correct wheels for a Riddles standard 4MT Mogul are:
pony 3’ 0” 9 mm 9 spoke
3’ 0” 9 mm 9 No pin Discontinued Chris Hardy
3’ 0” 9 mm 9 No pin 3 mm Society W48
drivers 5’ 3” 15.75 mm 16 spoke pin between, 26” stroke.
5’ 0” 15 mm 16 pin between discontinued Chris Hardy
5’ 0” 15 mm 16 pin between Long pin 3 mm Society W10 3 mm Society W8 for 14.2
5’ 0” 15 mm 16 pin between Short pin 3 mm Society W11 3 mm Society W9 for 14.2
tender 3’ 3½” 9.875 mm 10 spoke, wheel base 6’ 6” - 6’ 6” on BR2 and BR2A, 7’ 0” - 7’ 0” on BR1B.
3’ 0” 9 mm 10 No pin Discontinued Chris Hardy
3’ 0” 9 mm 10 No pin Kean-Maygib KM12 (330)
3’ 0” 9 mm 10 No pin Large hub Romford
3’ 0” 9 mm 10 No pin 3 mm Society W1
or
3’ 4” 10 mm 10 No pin 3 mm Society W79
76000-76044 had BR2 3,500 gallon tenders, 76045-76052 and 76070-76114 had BR2A 3,500 gallon tenders, 76053-76069 had BR1B 4,725 gallon tenders. 76030-76034 had cab cut outs for Whitaker’s tablet catchers

BR Standard class 3MT 77XXX Riddles 2-6-0. Planned Chris Thane etched and cast resin kit, 100-2-1-002. 77000-77019. Wheel base 8’ 9” - 7’ 7” + 7’ 9”. The correct wheels for a Riddles standard 3MT Mogul are:
pony 3’ 0” 9 mm 9 spoke
3’ 0” 9 mm 9 No pin Discontinued Chris Hardy
3’ 0” 9 mm 9 No pin 3 mm Society W48
drivers 5’ 3” 15.75 mm 16 spoke pin between, 26” stroke.
5’ 0” 15 mm 16 pin between discontinued Chris Hardy
5’ 0” 15 mm 16 pin between Long pin 3 mm Society W10 3 mm Society W8 for 14.2
5’ 0” 15 mm 16 pin between Short pin 3 mm Society W11 3 mm Society W9 for 14.2
tender 3’ 3½” 9.875 mm 10 spoke, wheel base 6’ 6” - 6’ 6” BR2A 3,500 gallon tender.
3’ 0” 9 mm 10 No pin Discontinued Chris Hardy
3’ 0” 9 mm 10 No pin Kean-Maygib KM12 (330)
3’ 0” 9 mm 10 No pin Large hub Romford
3’ 0” 9 mm 10 No pin 3 mm Society W1
or
3’ 4” 10 mm 10 No pin 3 mm Society W79

BR Standard class 4MT 80XXX Riddles 2-6-4T, BEC cast kit 3SMR C11. Wheel base 9’ 0”- 7’ 7” + 7’ 9” - 6’ 3” - 6’ 3” bogie. 80000 - 80075 had fluted coupling rods, 80076 - 80154 plain. The correct wheels for a Riddles standard 4MT tank are:
pony and bogie 3’ 0” 9 mm 9 spoke
3’ 0” 9 mm 9 No pin Discontinued Chris Hardy
3’ 0” 9 mm 9 No pin 3 mm Society W48
drivers 5’ 8” 17 mm 18 spoke pin between, 28” stroke.
5’ 8” 17 mm 18 pin between 3.5 mm throw Sharman S442
or if tight (which it shouldn’t be), or 14.2
5’ 6” 16.5 mm NEW Romford finescale wheel WR16.5/18 (18 spoke) from 3SMR
5’ 6” 16.5 mm 18 pin between Long pin 3 mm Society W14 3 mm Society W12 for 14.2
5’ 6” 16.5 mm 18 pin between Short pin 3 mm Society W15 3 mm Society W13 for 14.2
5’ 6” 16.5 mm 18 pin between Discontinued Chris Hardy

BR standard class 3MT 820XX Riddles 2-6-2T. 3SMR etched and cast kit ECS1. Wheel base 8’ 9”- 7’ 7” + 7’ 9” - 8’ 6”. 82000 - 82019 had fluted coupling rods, 82020 - 82044 plain. Chris Thane does a Comet derived etched chassis. The correct wheels for a Riddles standard 3MT 2-6-2T are:
ponies 3’ 0” 9 mm 9 spoke
3’ 0” 9 mm 9 No pin Discontinued Chris Hardy
3’ 0” 9 mm 9 No pin 3 mm Society W48
drivers 5’ 3” 15.75 mm 16 spoke pin between, 26” stroke.
5’ 0” 15 mm 16 pin between discontinued Chris Hardy
5’ 0” 15 mm 16 pin between Long pin 3 mm Society W10 3 mm Society W8 for 14.2
5’ 0” 15 mm 16 pin between Short pin 3 mm Society W11 3 mm Society W9 for 14.2

BR Standard class 9F 92XXX Riddles 2-10-0. Branchlines etched chassis and Branchlines / Locotech resin body. Malcolm Mills also does a cast polyurethane resin body which is based on a Triang Britannia. 92000 - 92250 all had plain coupling rods and Walschaerts valve gear. 92020 - 92029 were built with Franco-Crosti boilers. 92000 - 92164 and 92168 - 92182 were built with single chimneys, 92165 - 92167 were built with double chimneys and mechanical stokers, 92183 - 92249 were built with double chimneys. 92000, 92001, 92002, 92005, 92006 and 92178 were retrofitted with double chimneys. 92250 had a Giesel ejector. 92060-92066 and 92097-92099 were fitted with air brakes for Tyne Dock ore workings. Wheel base 8’ 6” - 5’ 5” + 5’ 5” + 5’ 5” + 5’ 5” which means that the wheels are too close together for flanges on full size wheels. The correct wheels for a Riddles standard 9F are:
pony 3’ 0” 9 mm 9 spoke, Sharman says 3’ 2” but all inside bearing standard wheels were 3’ 0”.
3’ 0” 9 mm 9 No pin Discontinued Chris Hardy
3’ 0” 9 mm 9 No pin 3 mm Society W48
drivers 5’ 0” 15 mm 15 spoke pin between, third pair flangeless, 28” stroke.
5’ 0” 15 mm 15 pin between Long pin 3 mm Society W22 3 mm Society W20 for 14.2
5’ 0” 15 mm 15 pin between Short pin 3 mm Society W23 3 mm Society W21 for 14.2
would need flanges turning down
4’ 8” 14 mm 15 pin between Long pin 3 mm Society W18 3 mm Society W16 for 14.2
4’ 8” 14 mm 15 pin between Short pin 3 mm Society W19 3 mm Society W17 for 14.2
tender 3’ 3½” 9.875 mm 10 spoke, wheel base 7’ 0” - 7’ 0”.
3’ 0” 9 mm 10 No pin Discontinued Chris Hardy
3’ 0” 9 mm 10 No pin Kean-Maygib KM12 (330)
3’ 0” 9 mm 10 No pin Large hub Romford
3’ 0” 9 mm 10 No pin 3 mm Society W1
or
3’ 4” 10 mm 10 No pin 3 mm Society W79
Standard class Nines were fitted with various tenders, 92020 - 92029 and NER locomotives 92060-92066, 92097-92099had BR1B 4,725 gallon with wide topped coal bunker, LMR locomotives 92015-92019, 92045-92059, 92077-92086, 92100-92139, 92150-92164 had BR1C 4,725 gallon with wide topped coal bunker, ER locomotives 92010-92014, 92030-92044, 92067-92076, 92087-92096, 92140-92149, 92168-92202 had BR1F 5,625 gallon with wide topped coal bunker, WR 92000-92009, 92203-92250 locomotives had BR1G 5,000 gallon with narrow topped coal bunker, 92165 - 92167 had BR1K 4,725 gallon with wide topped coal bunker and mechanical stoker.

Ministry Of Supply WD class 8F 90XXX Riddles 2-8-0. 3SMR etched kit. Wheel base 8’ 7”- 5’ 3” + 5’ 3” + 5’ 9”. BR numbers 90000 - 90732. LNER class O7 numbers 3000 - 3199. 935 were built. The correct wheels for a Riddles WD 2-8- 0 are:
pony 3’ 2” 9.5 mm disc with 2 small holes.
Use a 9 mm wagon wheel
drivers 4’ 8½” 14.125 mm, ‘pressed’ according to Sharman but actually cast including the very large balance weights with 12 spokes which have pronounced webs and very little daylight between. The Pin is between and 28” stroke. The first, second and fourth pairs of wheels are iron and the third driving pair are steel. The nearest wheel for appearance is probably the 14 mm Triang Jinty wheel.
Tender 3’ 2” 9.5 mm disc with 2 small holes, 8 wheel 5,000 gallon tender wheel base 5’ 3” - 5’ 3” - 5’ 3”.
Use a 9 mm wagon wheel

Ministry Of Supply WD class 8F 907XX Riddles 2-10-0. 3SMR etched kit. Wheel base 8’ 8”- 5’ 3” + 5’ 3” + 5’ 3” + 5’ 3”. BRR numbers 90750 - 90774. 150 were built. The correct wheels for a Riddles WD 2-10- 0 are:
pony 3’ 2” 9.5 mm disc with 2 small holes.
Use a 9 mm wagon wheel
drivers 4’ 8½” 14.125 mm ‘pressed’ according to Sharman but actually cast including the very large balance weights with 12 spokes which have pronounced webs and very little daylight between. The Pin is between and 28” stroke. The first, second, fourth and fifth wheels are iron and the third driving pair are flangeless steel. The nearest wheel for appearance is probably the 14 mm Triang Jinty wheel, the flangeless Triang wheel is ½ mm smaller. As it is very difficult to turn finer flanges onto Triang wheels, fitting new tyres to flangeless wheels is probably easier.
Tender 3’ 2” 9.5 mm disc with 2 small holes, 8 wheel 5,000 gallon tender wheel base 5’ 3” - 5’ 3” - 5’ 3”.
Use a 9 mm wagon wheel
Pony Wheels and Other Wheels without crank pins
Prototype size Model size Spokes Crank pin Comment Manufacturer & 12 mm Code Manufacturer & 14.2 mm Code
2’ 6” 7.5 mm Disc No pin No holes, metal Tillig 08818
2’ 8” 8 mm 8 No pin Gibson 3008 AG7
2’ 8” 8 mm Disc No pin No holes, metal Tillig 08819 & 08820
2’ 8” 8 mm Disc No pin 2 holes Kean-Maygib KM4 (3007) Kean-Maygib KM31
2’ 8” 8 mm Disc No pin Gibson 3007 AG8
2’ 8” 8 mm 8 No pin 2 mm axle Sharman M390
3’ 0” 9 mm 8 No pin Kean-Maygib KM2 (3000) Kean-Maygib KM25
3’ 0” 9 mm 8 No pin Gibson 3000 AG1
3’ 0” 9 mm 8 No pin 1/16 axle Osborne OS2
3’ 0” 9 mm 8 No pin 1.5 mm axle Osborne OS5
3’ 0” 9 mm 8 No pin 3 mm Society CN1
3’ 0” 9 mm 8 No pin Sharman S392
3’ 0” 9 mm 9 No pin Discontinued Chris Hardy
3’ 0” 9 mm 9 No pin 3 mm Society W48 3 mm Society W48
3’ 0” 9 mm 10 No pin Discontinued Chris Hardy
3’ 0” 9 mm 10 No pin Kean-Maygib KM12 (330)
3’ 0” 9 mm 10 No pin Large hub Romford
3’ 0” 9 mm 10 No pin 3 mm Society W1 3 mm Society W1
3’ 0” 9 mm 12 No pin 3 mm Society W? 3 mm Society W? for B16
3’ 0” 9 mm Disc No pin 3 holes Kean-Maygib KM7 (3002) Kean-Maygib KM23
3’ 0” 9 mm Disc No pin 3 holes Gibson 3002 AG2
3’ 0” 9 mm Disc No pin No holes Gibson 3009 AG3 [DMU]
3’ 0” 9 mm Disc No pin 1/16 axle Osborne OS3
3’ 0” 9 mm Disc No pin 1.5 mm axle Osborne OS6
3’ 0” 9 mm Disc No pin 3 mm Society CN2
3’ 0” 9 mm Disc No pin No holes, metal Jackson
3’ 0” 9 mm Disc No pin No holes, metal Romford
3’ 4” 10 mm 8 No pin Sharman M398
3’ 4” 10 mm 10 No pin 3 mm Society W79 3 mm Society W79
3’ 4” 10 mm Disc No pin Sharman M396
3’ 6” 10.5 mm 8 No pin 3 mm Society W51 3 mm Society W51
3’ 6” 10.5 mm 10 No pin Discontinued Chris Hardy
3’ 6” 10.5 mm 10 No pin Kean-Maygib KM5 (336)
3’ 6” 10.5 mm 10 No pin Gibson 3005 AG5
3’ 6” 10.5 mm 10 No pin 3 mm Society W2 3 mm Society W2
3’ 6” 10.5 mm 12 No pin Discontinued Chris Hardy
3’ 6” 10.5 mm 12 No pin Large hub Romford
3’ 6” 10.5 mm 12 No pin 3 mm Society W49 3 mm Society W49
3’ 6” 10.5 mm Disc No pin Discontinued Chris Hardy
3’ 6” 10.5 mm Disc No pin No holes Kean-Maygib KM3 (3005) Kean-Maygib KM26
3’ 6” 10.5 mm Disc No pin No holes Gibson AG4
3’ 6” 10.5 mm Disc No pin 1/16 axle Osborne OS4
3’ 6” 10.5 mm Disc No pin 1.5 mm axle Osborne OS7
3’ 6” 10.5 mm Disc No pin No holes, metal Jackson
3’ 6” 10.5 mm Disc No pin No holes, metal Romford
3’ 6” 10.5 mm Disc No pin 3 mm Society CN3
3’ 6” 10.5 mm Disc No pin Mansell 3 mm Society W76 3 mm Society W76
3’ 6” 10.5 mm Disc No pin Mansell 3 mm Society CN4
3’ 8” 11 mm 8 No pin Sharman S018
3’ 8” 11 mm 9 No pin Sharman M402
3’ 8” 11 mm 10 No pin Sharman M404
3’ 8” 11 mm 10 No pin 3 mm Society W78 3 mm Society W78
3’ 8” 11 mm 10 No pin Webb ‘H’ 3 mm Society W77 3 mm Society W77
3’ 8” 11 mm 12 No pin Sharman M406
3’ 8” 11 mm 12 No pin 3 mm Society W? 3 mm Society W? for B16
4’ 0” 12 mm 8 No pin Sharman M408
4’ 0” 12 mm 10 No pin Discontinued Chris Hardy
4’ 0” 12 mm 10 No pin Large hub Romford
4’ 0” 12 mm 10 No pin Sharman L410
4’ 0” 12 mm 10 No pin 3 mm Society W50 3 mm Society W50
4’ 0” 12 mm 12 No pin Discontinued Chris Hardy
4’ 0” 12 mm 12 No pin Kean-Maygib KM11 (340)
4’ 0” 12 mm 12 No pin Sharman M412
4’ 0” 12 mm 12 No pin 3 mm Society W3 3 mm Society W3
4’ 0” 12 mm Disc No pin Romford
Pony Wheels and Other Wheels without crank pins
Prototype size Model size Spokes Crank pin Comment Manufacturer & 12 mm Code Manufacturer & 14.2 mm Code
4’ 2” 12.5 mm 12 No pin 3 mm Society W84 3 mm Society W84
4’ 2” 12.5 mm Disc No pin Kean-Maygib KM18 (341)
4’ 3” 12.75 mm 12 No pin Kean-Maygib KM17 (342)
4’ 4” 13 mm 10 No pin Sharman S054
4’ 8” 14 mm 12 No pin Sharman S420
5’ 0” 15 mm 12 No pin Sharman S090
6’ 0” 18 mm 20 No pin 1/8” axle Sharman M444

Driving Wheels with crank pins
Prototype size Model size Spokes Crank pin Comment Manufacturer & 12 mm Code Manufacturer & 14.2 mm Code
3’ 0” 9 mm 6 pin in line 2.5 mm throw Sharman M394
3’ 4” 10 mm 10 pin between 2.5 mm throw: 2 mm axle Sharman S400
3’ 4” 10 mm Disc pin 2.5 mm throw Sharman M014
4’ 0” 12 mm 8 pin in line 3 mm throw Sharman M034
4’ 0” 12 mm 10 pin between 3 mm throw Sharman M414
4’ 0” 12 mm 10 pin between 2.5 mm throw Stapleton Stapleton
4’ 0” 12 mm 12 Discontinued 3/32” axle Chris Hardy
4’ 0” 12 mm 12 pin in line 2.5 mm throw Sharman M416
4’ 0” 12 mm 12 pin between Long pin 3 mm Society W26 3 mm Society W24
4’ 0” 12 mm 12 pin between Short pin 3 mm Society W27 3 mm Society W25
4’ 0” 12 mm 15 pin in line 2.5 mm throw Stapleton Stapleton
4’ 3” 12.75 mm 13 Long pin 3 mm Society W95 3 mm Society W93
4’ 3” 12.75 mm 13 Short pin 3 mm Society W96 3 mm Society W94
4’ 4” 13 mm 10 pin between 3 mm throw Sharman M058
4’ 4” 13 mm 12 pin in line Webb ‘H’ 3 mm throw Sharman M418
4’ 6” 13.5 mm 12 pin between Webb ‘H’ Discontinued Chris Hardy
4’ 6” 13.5 mm 12 pin between Long pin Webb ‘H’ 3 mm Society W62 3 mm Society W60
4’ 6” 13.5 mm 12 pin between Short pin Webb ‘H’ 3 mm Society W63 3 mm Society W61
4’ 6” 13.5 mm 14 pin in line 4’ 7½” Kean-Maygib KM20 (347)
4’ 6” 13.5 mm 14 pin between Long pin 3 mm Society W70 3 mm Society W68
4’ 6” 13.5 mm 14 pin between Short pin 3 mm Society W71 3 mm Society W69
4’ 6” 13.5 mm 15 pin between Long pin 3 mm Society W74 3 mm Society W72
4’ 6” 13.5 mm 15 pin between Short pin 3 mm Society W75 3 mm Society W73
4’ 8” 14 mm 15 spoke 3SMR/Scalelink WR1415
4’ 8” 14 mm 15 spoke Romford WR14/15p (plain) WR14/15i (insulated)
4’ 8” 14 mm 12 pin between 3 mm throw Sharman S422 (discontinued)
4’ 8” 14 mm 13 pin between 3.5 mm throw Sharman S424 (discontinued)
4’ 8” 14 mm 14 pin between Discontinued Chris Hardy
4’ 8” 14 mm 14 pin between 3.5 mm throw Pannier wheel Sharman M426
4’ 8” 14 mm 14 pin between Long pin 3 mm Society W6 3 mm Society W4
4’ 8” 14 mm 14 pin between Short pin 3 mm Society W7 3 mm Society W5
4’ 8” 14 mm 15 Discontinued Chris Hardy
4’ 8” 14 mm 15 pin in line 3.5 mm throw Sharman M428
4’ 8” 14 mm 15 pin between Long pin 3 mm Society W18 3 mm Society W16
4’ 8” 14 mm 15 pin between Short pin 3 mm Society W19 3 mm Society W17
4’ 8” 14 mm 16 pin between Discontinued Chris Hardy
4’ 8” 14 mm 16 pin in line Romford
5’ 0” 15 mm 10 pin between 5 mm throw Sharman S92 (00 wheel)
5’ 0” 15 mm 12 pin between 5 mm throw Sharman M98 (00 wheel)
5’ 0” 15 mm 13 pin between 3.5 mm throw Sharman M430
5’ 0” 15 mm 14 pin between 3.5 mm throw Sharman M432
5’ 0” 15 mm 15 pin in line Discontinued Chris Hardy
5’ 0” 15 mm 15 pin between Long pin 3 mm Society W22 3 mm Society W20
5’ 0” 15 mm 15 pin between Short pin 3 mm Society W23 3 mm Society W21
5’ 0” 15 mm 16 pin between Discontinued Chris Hardy
5’ 0” 15 mm 16 pin in line Kean-Maygib KM15 (350)
5’ 0” 15 mm 16 pin in line Romford
5’ 0” 15 mm 16 pin between Long pin 3 mm Society W10 3 mm Society W8
5’ 0” 15 mm 16 pin between Short pin 3 mm Society W11 3 mm Society W9
5’ 3” 15.75 mm 15 Long pin 3 mm Society W87 3 mm Society W85
5’ 3” 15.75 mm 15 Short pin 3 mm Society W88 3 mm Society W86
5’ 4” 16 mm 12 pin between 5 mm throw Sharman M110 (00 wheel)
5’ 4” 16 mm 14 pin in line 3.5 mm throw Sharman M434
5’ 4” 16 mm 15 pin in line 3.5 mm throw Sharman M436
Driving Wheels with crank pins
Prototype size Model size Spokes Crank pin Comment Manufacturer & 12 mm Code Manufacturer & 14.2 mm Code
5’ 6” 16.5 mm NEW Romford finescale wheel WR16.5/18 (18 spoke) from 3SMR
5’ 6” 16.5 mm 18 pin in line Kean-Maygib KM8 (356)
5’ 6” 16.5 mm 18 pin between Long pin 3 mm Society W14 3 mm Society W12
5’ 6” 16.5 mm 18 pin between Short pin 3 mm Society W15 3 mm Society W13
5’ 6” 16.5 mm 20 pin in line Long pin 3 mm Society W? 3 mm Society W? for B16
5’ 6” 16.5 mm 20 pin in line Short pin 3 mm Society W? 3 mm Society W? for B16
5’ 8” 17 mm 14 pin in line 3.5 mm throw Sharman M438
5’ 8” 17 mm 16 pin between 3.5 mm throw Sharman M440
5’ 8” 17 mm 18 pin between 3.5 mm throw Sharman S442
5’ 9” 17.25 mm 18 pin between Long pin 3 mm Society W91 3 mm Society W89
5’ 9” 17.25 mm 18 pin between Short pin 3 mm Society W92 3 mm Society W90
6’ 0” 18 mm 15 pin between 3.5 mm throw Sharman M446
6’ 0” 18 mm 16 pin in line Romford
6’ 0” 18 mm 16 pin between 3.5 mm throw Sharman M448
6’ 0” 18 mm 18 Discontinued Chris Hardy
6’ 0” 18 mm 18 pin in line Kean-Maygib KM16 (360)
6’ 0” 18 mm 18 Long pin 3 mm Society W30 3 mm Society W28
6’ 0” 18 mm 18 Short pin 3 mm Society W31 3 mm Society W29
6’ 0” 18 mm 19 Discontinued Chris Hardy
6’ 0” 18 mm 19 Long pin 3 mm Society W82 3 mm Society W80
6’ 0” 18 mm 19 Short pin 3 mm Society W83 3 mm Society W81
6’ 0” 18 mm 20 Discontinued Chris Hardy
6’ 0” 18 mm 20 pin between Long pin 3 mm Society W34 3 mm Society W32
6’ 0” 18 mm 20 pin between Short pin 3 mm Society W35 3 mm Society W33
6’ 4” 19 mm 18 pin in line 3.5 mm throw Sharman M450
6’ 4” 19 mm 20 pin in line 3.5 mm throw Sharman M452
6’ 4” 19 mm 20 pin between Long pin 3 mm Society W54 3 mm Society W52
6’ 4” 19 mm 20 pin between Short pin 3 mm Society W55 3 mm Society W53
6’ 4” 19 mm 22 pin between Long pin 3 mm Society W58 3 mm Society W56
6’ 4” 19 mm 22 pin between Short pin 3 mm Society W59 3 mm Society W57
6’ 6” 19.5 mm 20 pin in line Kean-Maygib KM19 (366)
6’ 8” 20 mm 18 pin in line Romford
6’ 8” 20 mm 18 pin between 3.5 mm throw Sharman M454
6’ 8” 20 mm 20 pin in line Discontinued Chris Hardy
6’ 8” 20 mm 20 pin between Long pin 3 mm Society W38 3 mm Society W36
6’ 8” 20 mm 20 pin between Short pin 3 mm Society W39 3 mm Society W37
6’ 8” 20 mm 20 pin in line Long pin large hub 3 mm Society W66 3 mm Society W64
6’ 8” 20 mm 20 pin in line Short pin large hub 3 mm Society W67 3 mm Society W65
6’ 8” 20 mm 21 pin in line Discontinued Chris Hardy
6’ 8” 20 mm 21 pin between Long pin 3 mm Society W42 3 mm Society W40
6’ 8” 20 mm 21 pin between Short pin 3 mm Society W43 3 mm Society W41
6’ 8” 20 mm 22 Discontinued Chris Hardy
6’ 8” 20 mm 22 pin in line 3.5 mm throw Sharman M456
6’ 8” 20 mm 22 pin between Long pin 3 mm Society W46 3 mm Society W44
6’ 8” 20 mm 22 pin between Short pin 3 mm Society W47 3 mm Society W45

   
 

 

Top of page

Proprietors: David & Malcolm Brenchley
4 Greenwood Drive,
Redhill, Surrey, RH1 5PJ

Designed By BrenTeck.com